Fader 1 MUTE: On/Off switch for the Fader 1 audio path
•
Automated mute switch
•
Will control the Fader 1 mute switch on the 1068L
module if that MUTE switch is not engaged
MUTE WRITE: Engages Mute Overwrite mode when held:
•
Pressing and holding will overwrite the recorded
moves for the mute and/or switches on selected
channel sections
•
The selected section is chosen using the SEL button
on the Fader module or the Channel Control window
•
Allows writing mute and switch automation
independently of the fader
SEL (Select): Channel section selector button
•
Each press will cycle through the following channel sections:
o
Fader 1 (the yellow “FD 1” LED will illuminate when
selected)
o
Fader 2 (the yellow “FD 2” LED will illuminate when
selected)
o
Switches (the yellow “SW” LED will illuminate when
selected)
o
All sections (all 3 yellow LEDs will be illuminated when
selected)
•
Pressing and holding this button will toggle the 2=1 mode on and
off
o
Fader 2 will mirror the Fader 1 position when engaged
o
The green “2=1” LED will illuminate when 2=1 is engaged
•
The mode of the selected section(s) is displayed on the fader’s
mode LEDs
Note: The section select LEDs on the fader are only used for local
control of the operation of the buttons on that fader. They also control
which section’s modes are displayed on the mode LEDs of that fader. In
other words, they have nothing at all to do with selections made in the
computer software.
MODE: Automation mode selectors:
•
Grey Button: Pressing the grey button will put the selected
channel sections Manual, Read, or Update modes
o
A single press of the grey button will toggle the selected
sections between Read and Update modes
o
Holding down the grey button for two seconds with put the
selected sections in Manual mode
o
While in Manual mode, a single press of the grey button
will change the selected sections to Read mode.
•
Red Button (WRITE): Pressing the red button will immediately put
the selected channel sections in Write mode
•
LED Indicators:
o
Manual: Neither LED is illuminated
o
Read: The green RD LED is illuminated
o
Update: The yellow UP LED is illuminated
o
Write: Both LEDs (WR) will be illuminated
