API Audio Accessories 7-22-10 Operator'S Manual Download Page 319

Page: 319 / 375

28.3

Channel Mapping

A “Channel Map” is used to define the linkage between the installed console hardware with the

PC software. The Channel Map also sets the 0dB point for Master Faders.

The Channel Map also determines the size of the channel grids used in other software windows

(Channel Control, Recall Settings, Group Edit, Snapshot Take/Apply, and similar windows).

To make changes to the Channel Map, select “Channel Mapping…” from the “Setup” menu in the

Main window.

The Channel Mapping window will open.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands