API Audio Accessories 7-22-10 Operator'S Manual Download Page 158

Page: 158 / 375

Selecting the “Manage FCMs…” submenu will open the Manage FCMs window.

The Manage FCMs window displays the current firmware versions installed in the

Fader Control Modules (FCM) and provides the means to load and program

firmware updates. A fader calibration utility is also provided.

The Manage FCMs window has two tabs “Program” (above) and “Calibrate”

(below). The “Program” window is used to update FCM firmware and the
“Calibrate” window is used for fader calibration.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands