UPDATE to NEXT MOVE IN UPDATE
UPDATE to NEXT MOVE IN WRITE
Use Update to Next Move to apply a static position between a certain point and the next
recorded move. For example, you need to work on the chorus of a song, but you have
already recorded moves you want to keep at the beginning of the bridge. In Update and
Update to Next Move, touch the fader at the needed point in the chorus and make the
needed moves. Release the fader before the bridge and the last position will be applied
until the move at the beginning of the bridge. When the bridge arrives, the fader will
glide to perform the moves recorded at the bridge.
26.5.4
Assigning Automation Modes and Submodes
Automation modes and submodes can be assigned to channel sections using software or
hardware:
•
Channel Control Window: Allows mode and submode assignment on an individual
and global basis in any combination
•
Vision Control Panel: Allows mode and submode assignment globally, but on a
section by section basis (Fader 1, Fader 2, and/or Switches)
•
Fader Controls: Allows mode assignment on an individual channel, but on a
section by section basis (Fader 1, Fader 2, and/or Switches) (mode only)
