3.6.3.1 Setting Fader Positions
To position faders, select “Position Faders…” from the Tools menu in the
Main software window.
The Position Faders window will open.
Select the position for all faders using the “Position All Faders” pull-down
menu.
Select the set of faders to position by clicking in the appropriate
checkbox.
Click
to apply the selected fader position to the selected faders
and close the window.
Click
to apply the selected fader position to the selected faders
and leave the window open.
Click
to cancel the operation without positioning the faders
and close the window.
Important Note: Positioning faders will move the selected faders from
their current positions. Any current mix positions
will be lost if not already stored in a snapshot or in
automation. There is no “undo” after fader positions
have been set.
