2.6 Block Diagrams
The series of basic block diagrams below indicate the signal flow through the Fader 1 and Fader 2
signal paths. A more technical and detailed signal flow diagram is available in a separate
document.
Each feature of both paths is shown in the order in which they occur within the channel. The
various processes are shown as if they are engaged.
All block diagrams assume the following:
•
A 212L Preamp installed in the Upper 200 Slot
•
Input Selector switches not engaged (MIC, TAPE, FDR1 MIC, or FDR2 TAPE)
•
FDR 1 switch not engaged on Fader 2
•
The Lower 200 Slot is Pre-EQ in Fader 1 with a 225L Compressor installed
•
Pan-pots engaged
•
These block diagrams do not show patch points
2.6.1
Basic Fader 1 Block Diagram
2.6.2 Basic Fader 2 Block Diagram
