6.2 Stereo Program Master Faders
There are three (3) Stereo Master Faders and one (1) Grand Master Fader:
The output if each Stereo Program Bus ACA feeds its own Stereo Master Fader. The Grand Master
ACA feeds the Grand Master Fader.
The three Stereo Program Busses may be fed simultaneously from:
•
Fader 1 output
•
Fader 2 output
•
E1068L Echo Return module
NOTE: It is possible to make simultaneous assignments to all three Stereo Program Busses
and the Surround Program Bus.
Stereo Program Bus assignments may be made:
•
Locally on the 16-channel Output Assignment module (ST A, ST B, ST C buttons)
•
Via the recall system
To activate Left-Right panning the following conditions must be met:
•
The channel must be assigned to one or more of the Stereo Program Busses (ST A, ST B,
and/or ST C)
•
The pan-pot (PAN) must be engaged in the assignment section
6.3
Stereo Grand Master
A stereo Grand Master Bus and Grand Master Fader are provided to facilitate a wide range of
operations. The three Stereo Program mixes, an External Input, and the output of the Lt Rt Fold
Down Matrix may be selected for mixing to the stereo Grand Master Bus.
Left and Right calibration trim-pots (CAL L-R) are provided for the primary Grand Master sources
to assure precision summing.
The Stereo Grand Master Bus may be fed from the following sources:
•
Stereo Program Master A (ST A)
•
Stereo Program Master B (ST B)
•
Stereo Program Master C (ST C)
•
External Stereo Source (EXT)
•
Output from the Lt Rt Fold Down Matrix
Stereo Program Master Faders:
•
Stereo A (ST A)
•
Stereo B (ST B)
•
Stereo C (ST C)
•
Grand Master (GM)
The STA, ST B, ST C Master Faders are the master output
level control for their respective Stereo Program Busses.
The GM fader is the Grand Master Fader. The Grand Master
is the master output level control for the Grand Master
Output. (See below)
All Master Faders and mutes are fully automatable.
Automation is covered in section 25.0 Automation.
