FADER 2: Controls the output level of the Fader 2 audio path
•
Full-size 100mm Fader
•
Fully automated
•
Touch sensitive for automation control
•
When the Fader is set to 0dB, the level is at unity gain
Hi-Pass (70 Hz Filter): Activates the Fader 2 high-pass filter
•
-3 dB at 70 Hz
•
6 dB/octave slope
•
Located Post-Fader
•
Recall
•
A green LED indicator illuminates when engaged
MUTE: Cuts the Fader 2 audio output
•
The MUTE button is the on/off switch for the Fader 2 audio path
•
Automation
•
Illuminates in red when engaged
SOLO: Activates the selected solo function for Fader 2
•
The following solo functions may be selected via the Center Section:
o
Pre-fader Listen (PFL): Non-destructive, mono
o
After Fader Listen (AFL): Non-destructive, mono
o
Solo-In-Place (SIP): Destructive, panned, post-fader
•
Illuminates in yellow when engaged
NOTE: AFL is the default solo mode.
SAFE: Activates the Solo Safe mode for Fader 2
•
The SAFE button protects Fader 2 from being muted when the Solo-
In-Place function is active and another channel is soloed
•
Recall
•
A yellow LED indicator illuminates when engaged
DIR (Direct Output): Routes the output of Fader 2 to the Direct Output
•
The Direct Output is fed POST the MUTE switch
•
The Direct Output is fed from Fader 1 by default
•
Recall
•
A yellow LED indicator illuminates when engaged
