API Audio Accessories 7-22-10 Operator'S Manual Download Page 311

Page: 311 / 375

The current firmware versions can be viewed using the Code Versions submenu of the ACM Main

Menu. The following information will be displayed:

•

ACM firmware version

•

FCM firmware version

•

Ambient temperature

•

Serial number

Use the “Code Versions” submenu to view the information listed above.

28.2.1

Updating PC Software

The installation of the Vision PC software is automated with an installation wizard.

To update the Vision software on the PC computer, open the downloaded .zip file.

Double-click the “setup.exe” icon.

The Vision installation Wizard will start.

To view the firmware versions, temperature, and

Serial Number, select “Code Versions” from the ACM
Main Menu and press the “Yes OK” button.

The Code Versions window will open.

Press the “No Cancel” button to return to the Main

Menu.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands