or
or
MIC PREAMP OUTPUT: Preamplifier Output (Upper
200 Slot or Options Bucket Out)
•
Feeds the input to the channel Input
Selector switch (MIC and TAPE) in both
paths (Fader 1 and Fader 2)
•
The MIC PREAMP OUTPUT is the default
source for Fader 2
•
Fader 1 will receive the MIC PREAMP
OUTPUT when the Fader 1 MIC switch is
engaged
•
Both paths may receive the signal from MIC
PREAMP OUTPUT simultaneously
COMP IN: Compressor Input (200 Slot Input)
•
Half-normalled to COMP SIDE CHAIN IN
COMP SIDE CHAIN IN: Compressor Side-Chain Input
(200 Slot Side-chain Input)
•
Half-normalled from COMP IN
COMP OUT: Compressor Output (200 Slot Output)
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2) (See 200
Slot Patching below)
NOTE: Patching into the COMP SIDE CHAIN IN will
replace the Compressor Input as the input to
the module’s detection path (side-chain)
GATE IN: Gate Input (200 Slot Input)
•
Half-normalled to KEY INPUT
KEY IN: Gate Key Input (200 Slot Key Input)
•
Half-normalled from GATE IN
GATE OUT: Gate Output (200 Slot Output)
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2) (See 200
Slot Patching below)
NOTE: Patching into the KEY INPUT will replace the
Gate Input as the input to the module’s detection
path (key input)
LOWER 200 IN: Lower 200 Slot Input
•
Half-normalled to LOWER 200 SIDE CHAIN IN
LOWER 200 SIDE CHAIN IN: Lower 200 Slot Side-chain
Input
•
Half-normalled from LOWER 200 IN
LOWER 200 OUT: Lower 200 Slot Output
•
Returns Pre or Post EQ in the programmed
audio path (Fader 1 or Fader 2) (See 200 Slot
Patching below)
NOTE: Patching into the SIDE CHAIN IN will replace
the Lower 200 Input as the input to the module’s
detection path (side-chain input)
