3.5.2.3
AUX PRE MUTE
The Pre-fader Auxiliary Sends can be made to mute when the channel MUTE
button is engaged. This is accomplished by engaging the AUX PRE MUTE button in
the SOLO area of the Center Section.
3.5.3
Tape Pad
Engaging the -6dB Tape Pad will reduce distortion and increase headroom in the audio path
when the level from the multitrack recorder return is hot enough to overload the TAPE
input.
3.5.4 Fader 2 Path Controls
-6 (TAPE PAD): Inserts a -6dB pad before the feed to the MIC/TAPE
selection switch in both paths.
•
Recall
•
A red LED indicator illuminates when engaged
The 1068L Fader 2 audio path is a complete audio channel designed to
serve the following functions:
•
Routing microphone and instrument inputs to a multitrack
recorder
•
Multitrack returns for additional inputs during mixdown
•
Retuning effects, virtual tracks, and other sources during
mixdown
•
LFE Send during mixdown
•
Additional Aux Send during mixdown
•
Creating stems and bouncing tracks
•
Any other operation that needs a fully featured audio path
Accordingly, the Fader 2 audio path is equipped with the following
features (in the order they appear in the signal flow):
•
MIC or TAPE input selection
•
Pre or Post EQ access to the channel 200 Slots (if link is set)
•
Access to Channel Meter (depending on Master Meter Selection)
•
Assignable EQ
•
Insert Send and Return
•
Fader 1 Output as an alternate input option
•
Phase Reverse (Polarity Inverter)
•
Channel Trim
•
Peak Indicator
•
Full-sized Automatable Fader
•
70 Hz High-pass Filter
•
Automatable mute
•
Full Solo Functions
•
Solo Safe
•
Direct Output
•
Stereo/Surround Panning
MIC is the default input for Fader 2 (TAPE and FDR2 TAPE not
engaged).
AUX PRE MUTE: Links the channel MUTE buttons with the Pre-Fader Aux
Sends
•
All Pre-fader Aux Sends mute when a channel MUTE button is
engaged
•
Illuminates in yellow when engaged
