Shift-Clicking can be continued in a series using different channel sections as long as the
next selection is a higher channel number than the last selected channel.
Ctrl + Click: To select a group of non-consecutive channel sections
•
Hold down the Ctrl key
•
Click on the desired channel sections in any order
Drag + Click (Rubber-banding): To select a region of channel sections
•
Click within the channel section of the first channel to be included
•
While holding down the left mouse button, drag the mouse over the region of
channels you wish to include in the selection
•
The channel sections within the rubber-band region of the same type as the
original will be selected
Drag + Click (Rubber-banding): To select a region of channels
•
Click outside the upper left-hand corner of the channel box of the first channel to
be included
•
While holding down the left mouse button, drag the mouse over the region of
channels you wish to include in the selection
•
The channels within the rubber-band region will be selected
Clicking within the Channel Section Grid will clear any previous selections, unless Shift +
Click or CTRL + Click methods are used. One or more channels can be added or deleted
to previously selections using Shift + Click or CTRL + Click methods. Rubber-banding can
be used in combination with Shift + Click and Ctrl + Click methods.
