API Audio Accessories 7-22-10 Operator'S Manual Download Page 333

Page: 333 / 375

28.10.1.1

Setting VCP Display Contrast

To set the VCP Display Contrast, use the following procedure:

Select “Console Settings” from the ACM Main Menu and press the “Yes

OK” button. The Console Settings submenu will open.

Use the up and down arrow buttons to select “Display Contrast” and press

the “Yes OK” button.

Use the up and down arrow buttons to set the contrast as needed.

Press the “Yes OK” button to accept the set value. Press the “No Cancel”

button to cancel the operation.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands