4.3.6 Procedures for Channel Output Assignments Using Software
4.3.6.1 Using the Recall System to Make Channel Output Assignments
To make channel output assignments using the recall system, perform the following
procedure:
1.
With a Project open, make sure any needed console settings have been stored in a
snapshot before changing the settings in the Recall Settings Window. (See 23.6.1
Taking a New Snapshot)
2.
Open the “Recall Settings” window using the “View” menu in the Main window.
3.
Select the desired channel(s) in the Channel Grid.
4.
Check the desired output assignments.
5.
The output assignments will be shown on the Channel Assignment Displays.
4.3.6.2 Saving Channel Output Assignments in a Snapshot
To save channel output assignments, the recall settings must be saved to a new snapshot.
To create a new snapshot that includes the console recall settings, perform the following
procedure:
1.
Make sure the console hardware is set as desired for the new snapshot.
2.
Open the “Recall Settings” window using the “View” menu in the Main window.
3.
Click the “Read Console” button in the Recalls Setting window to make sure the
console settings match the settings in the recall system memory buffer.
4.
With a Project open, click the Snapshot tab.
5.
Right-click in the Snapshot List and select “Take Snapshot” from the menu. The
“Take Snapshot” window will open.
6.
Select one or more channels using the Channels To Save selection grid or click the
“All Channels” button to select all channels.
7.
Select the channel sections to include in the snapshot using the checkboxes in the
“Sections to Save” section. Make sure the “Recall Switches” checkbox is checked.
8.
Enter a Name for the new snapshot.
9.
Click the “Take Snapshot” button to create the new snapshot.
10.
The “Take Snapshot” window will close and the new snapshot with the recall
settings, including the channel output assignments, will appear in the Snapshot List.
