The controls for the 212L Mic Preamp function as follows:
NOTE: The switches on this module are not part of the automation or recall systems.
205L Direct Input
The 205L Direct Input may be fitted in a channel 200 Slot or Options Bucket.
The controls for the 205L Direct Input function as follows:
Features
•
Wide range GAIN control
•
Hi-Z input, like a Tube Amp
•
Thin < > Fat TONE Control reduces low end mud
•
BRIGHT Switch boosts the presence
•
20 dB PAD lowers the input level
•
100 K LOAD switch changes the tone of instruments
•
5 Segment LED Meter shows Output Level
•
Transformer Coupled Output to +28 dBm
•
All Discrete Design
GAIN: Sets the preamplifier gain
•
55 dB gain range
VU (Meter): LED meter indicates output level
-20: Inserts a -20dB Pad at the microphone input
•
A red LED indictor illuminates when engaged
48V: Provides 48 Volt Phantom Power to the Mic Preamp In patch point
•
The Mic Tie Line Out patch points are fully-normalled to the Mic Preamp In
patch points
•
A green LED indicator illuminates when engaged
ON (On/Off switch): Activates the module
•
A green LED indicator illuminates when engaged
Hi-Z IN (High Impedance ¼” Input Jack): Instrument input jack
•
Illuminated in blue
100K LOAD: Engages a 100K Ohm input load
•
Changes the tone of the pickup and tends to darken the high frequency content
