The controls for the Fader 1 audio path are as follows:
NOTE: The Fader 1 input on all channels may be set to MIC by engaging the
FDR1 MIC Master Input Selector switch (Input Select) in the Center Section.
MIC: Selects the output of the preamp (MIC) as the active input for Fader 1
•
MIC may be the active input for both faders
•
TAPE is the default Fader 1 input
•
Recall
•
A yellow LED indicator illuminates when engaged
INS (Insert): Activates the Fader 1 Insert Return
•
The Insert Send is fed pre-fader from the output of the Equalizer
•
The Insert Send is always active
•
The Insert Return is located PRE the Fader input
•
The Insert Return is active only when the INS button is engaged
•
Automation
•
A green LED indicator illuminates when engaged
Ø (Phase Reverse): Inserts a Phase Reverse (Polarity Inverter) in the
Fader 1 audio path
•
Recall
•
A red LED indicator illuminates when engaged
TRIM: Sets the amount of pre-fader level Trim (boost)
•
0 to +12dB of gain
•
Located Pre-fader, so the added gain is reflected in all post-fader
stages (Aux Sends, Solos, Bus Assignments and Direct Output).
PEAK: A red LED illuminates when the preset Peak Reference level is reached
in the Fader 1 audio path
•
Peak level is selected by the PEAK REFERENCE selector in the Center
Section
FADER 1: Controls the output level of the Fader 1 audio path
•
When the Fader is set to 0dB, the audio path level is at unity gain
•
Full-size 100mm Fader
•
Fully automated
•
Touch sensitive for automation control
•
Contains the automation controls for both faders and switches
(Hi-Pass Filter) switch: Activates the Fader 1 high-pass filter
•
Recall
•
A green LED indicator illuminates when engaged
