26.7.3.6
Defaults
The Defaults submenu allows a set of known conditions to be set and quickly
recalled directly from the Automation Control Module (ACM) without the need for
the Vision PC. These known conditions can be used as common session starting
points and function essentially as “presets.”
The Defaults are as follows:
•
Default State: Preset ACM settings
•
Default Groups: A default set of configured groups
•
Default Snapshot: A default set of fader and switch positions and routing
ACM DEFAULT STATE
To quickly reset the ACM to a known condition at the beginning of a mix, a Default
State can be set.
In the Default State, the following parameters are set:
•
Manual mode
•
No submodes engaged
•
Auto Save engaged
•
Faders enabled
•
Groups enabled
•
Switches enabled
•
Timecode enabled
The mix in the ACM is unaffected when the Default State is set.
To reset the console to a default
condition, select “Defaults” from the ACM
Main Menu and press the “Yes OK”
button.
The Clear Recall confirmation window will
open.
Press “Yes OK” to clear recall settings on
a global basis. This operation can be
canceled by pressing the “No Cancel”
button.
The Defaults window will open.
Use the up and down arrow buttons to
move the cursor to the desired Default
function.
Press the “Yes OK” button to start the
selected function.
