Note: Clicking the Read Console button will replace the settings in the Recall Settings
window with the settings from the console.
If only one channel is selected, the current assignments will be shown as checked boxes in
the Recall Settings window.
If more than one channel is selected, the Recall Settings window will display the
assignments on the selected channels as follows:
4.3.4 Channel Output Assignments
The channel output assignment selections are as follows:
Pan to Stereo: Engages the Fader 1 Pan-pot
Stereo C: Assigns Fader 1 to the Stereo C Program Bus
Stereo B: Assigns Fader 1 to the Stereo B Program Bus
Stereo A: Assigns Fader 1 to the Stereo A Program Bus
5.1: Assigns Fader 1 to the Surround Program Bus
Pan to Stereo: Engages the Fader 2 Pan-pot
Stereo C: Assigns Fader 2 to the Stereo C Program Bus
Stereo B: Assigns Fader 2 to the Stereo B Program Bus
Stereo A: Assigns Fader 2 to the Stereo A Program Bus
5.1: Assigns Fader 2 to the Surround Program Bus
An empty checkbox indicates the output is not assigned on any of the channels
selected in the Channel Grid. Clicking in any empty checkbox will assign the selected
channel(s) to that output. A checkmark will appear in the box, indicating the
assignment has been made.
A green checkmark indicates the output is assigned on all of the channels selected in
the Channel Grid. Clicking a checkmark will de-assign that output on all selected
channel(s).
A green square filling the checkbox indicates the output is assigned on some, but not
all of the channels selected in the Channel Grid. Clicking a green square will assign
that output on all selected channel(s).
The current output assignments for each channel are also shown on the
Channel Output Displays. The LED indicator will illuminate on active
assignments.
If the Direct Output is to routed from Fader 2 its LED
will indicate
that status.
