The “Mapping” section allows data from one fader to be applied to the other fader
or the data from one switch to one or more of the other switch(es).
The Copy/Swap section sets the Copy or Swap function,
as well as the origin and destination channels. The
Copy/Swap section contains the following controls:
•
From: The channel from which the data to be
copied or swapped originates
o
Enter the channel number to copy or
swap from
•
To: The channel to which the data will be copied
or swapped with
o
Enter the channel number to copy swap
to
•
Copy: Activates the Copy function…allows data to
be copied from one channel to another or from
one channel section to another
•
Swap: Activates the Swap function…allows data
to be swapped between two channels
Note: “Swap” is only available when the “From” and “To”
entry fields are set to different channels.
The Timecode Range section sets either all
Timecode addresses to be selected or a range
of addresses with user-defined beginning and
ending points. The Timecode Range section
contains the following controls:
•
All Timecodes: Selects the entire
range of Timecode locations
(00:00:00:00 to 23:59:59:XX )
•
Range of Timecodes: Selects a range
of Timecode locations (TC Begin to TC
End)
•
TC Begin: The starting Timecode
location
o
Enter the beginning Timecode
•
TC End: The ending Timecode
location
o
Enter the ending Timecode
Note: The “TC Begin” and “TC End” entry
fields are only available when “Range
of Timecodes” is selected.
