25.10.1
Enabling Groups Globally
To “Enable” all groups on a global basis, perform the following procedure:
1.
Open the Global Functions window using the “View” menu in the Main window.
2.
Click the “En: Groups” button in the Global Functions window or engage the “Enable
Groups” button on the Vision Control Panel.
3.
Click the “En: Faders” and/or “En: Switches” buttons in the Global Functions window
or engage the “Enable Faders” and “Enable Switches” buttons on the Vision Control
Panel.
4.
The buttons will illuminate and the console hardware will respond to the groups
setup in software.
To “Disable” all groups on a global basis, perform the following procedure:
1.
Open the Global Functions window using the “View” menu in the Main window.
2.
Click the “En: Groups” button in the Global Functions window or engage the “Enable
Groups” button on the Vision Control Panel to “Disable” or “Suspend” all group
functions.
3.
The button light will extinguish and the console hardware will not respond to the
groups setup in software.
25.10.2 Making a New Group
To make a new group, perform the following procedure:
1.
Make sure that Groups, Faders, and Switches are “Enabled.”
2.
Select “New Group” from the Groups Menu to open the “Edit Group” window.
3.
Enter a “Group Name” for the new group.
4.
Select the “Sections” to be included in the group. This must happen before Group
Master and Members are selected.
5.
Select the “Group Type.”
6.
If setting up a fader group, make sure the fader that will be the Group Master is set
to 0dB or another desired value other than -
∞
dB.
7.
Click on channel or fader to be designated as the Group Master.
8.
Click to select the Group Members.
9.
Click the “OK” button to create the new snapshot.
10.
The “Edit Group” window will close, the new group will appear in the Group List, and
a new mix containing the group will appear in the Mix Tree.
