UPDATE FROM START IN UPDATE
UPDATE FROM START IN WRITE
Use Update from Start to apply a static position from a certain point back to the very
beginning. For example, the level of a track is good for the chorus of a song, but too loud
during the intro and first verse. In Update and Update from Start playback the song and
move the fader to find the desired level for the intro and first verse. Release the fader
Update From Start: The last positions of a channel section
are applied to the start of Timecode (00:00:00:00):
•
Moves will not be recorded up to the point Timecode
is stopped…only the last positions are applied
•
Recording can be stopped for faders in Update by
releasing the fader
•
Recording can be stopped in Write mode by stopping
Timecode or changing the mode/submode
•
Update from Start is useful when seeking the level of
a track from the start of a recording up to a chosen
point. A fader can be moved until the proper level is
found and then held until the end of the first section
of the recording. The last position will be applied to
the start of timecode.
•
Update from Start can be used in Update and Write
modes only
•
Update from Start has no effect when used in Manual
or Read modes
•
When Update from Start is engaged on at least one
channel section:
o
The Update from Start button on the VCP
illuminates in red
o
Channel sections have a lavender submode
box
