API Audio Accessories 7-22-10 Operator'S Manual Download Page 329

Page: 329 / 375

After Default Groups have been burned, they may be loaded directly from the ACM.

Select “Burn Def. Groups” from the Defaults menu and

press the “Yes OK” button.

The Burn Groups confirmation window will open.

Press “Yes OK” to burn the current groups to the

ACM memory. This operation can be canceled by
pressing the “No Cancel” button.

The Load Groups confirmation window will open.

Press “Yes OK” to load the Default Groups. This

operation can be canceled by pressing the “No

Cancel” button.

To load the Default Groups, select “Load Def. Groups”

from the Defaults menu and press the “Yes OK” button.

Select “Burn Def. Groups” from the Defaults menu and
press the “Yes OK” button.

To burn the Default Groups, select “Defaults” from the

ACM Main Menu and press the “Yes OK” button. The

Defaults submenu will open.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands