manualshive.com logo in svg

API Audio Accessories 7-22-10, Operator'S Manual

The API Audio Accessories 7-22-10 Operator's Manual is a comprehensive guide for users of this remarkable product. You can easily download the manual for free from our website, manualshive.com, where we specialize in providing user manuals for various products. Get all the necessary information to maximize your experience with this exceptional API Audio Accessories 7-22-10 through our convenient manual download.

Share
Download
background image

26.3.1.1

 

Automation Control Module (ACM) 

 

The Automation Control Module (ACM) is the master controller and computer 

interface for the automation system.   

 

The ACM is responsible for all real time automation features and always holds the 
last mix pass in its volatile RAM memory.  If the computer crashes, it is still 

possible to continue working and recover the last mix pass from the ACM, as long 

as power is not lost.  In fact, the ACM can function perfectly well without the 
computer, with the exception of a few inaccessible commands and the ability to 

save your work to disk. 

 
The ACM can hold only one mix pass at a time. 

 

If the ACM fails, all of the automation functions are inaccessible, and your most 

recent mix pass is lost.  However the console remains active for manual control 
and all of your saved mixes are safe in the Vision PC. 

 

The ACM also provides the SMPTE and MIDI Timecode interfaces for automation 
synchronization and the MIDI interface for DAW control.  The ACM  is typically 

mounted under the console or installed in an external rack.   

 
The ACM is programmed using a firmware file that can be updated as needed.  

The ACM firmware can be updated by selecting “Update ACM Firmware…” from the 

Setup Menu in the Main window.  See section 28.0 System Setup, Maintenance, 

and Updates for detailed information on firmware management. 

 

26.3.1.2

 

Vision Control Panel (VCP) 

 

 

 

The bottom rows of yellow and green buttons control the saving of the mix in the 

ACM, the selection of channel sections for automation, and navigation controls.  
These buttons are unique to the VCP and are not mirrored elsewhere. 

 

The VCP panel is located next to the master faders in the Center Section. 

 

VPC display is programmed using a firmware file that can be updated as needed.  

The VCP display can be updated by selecting “Update Display Firmware…” from 
the Setup Menu in the Main window.  See section 28.0 System Setup, 

Maintenance, and Updates for detailed information on firmware management. 

Vision Control Panel (VCP):  The Vision Control 

Panel is the control panel and display for the ACM.  

It provides a 5 by 6 matrix of switches and a 
backlit 128x64 LCD display. 

 

The main display shows current Timecode, 
Function Enables, Auto Takeover status, Mix 

name, percentage of ACM memory used, Timecode 

frame-rate, and connection status. It can also 
display fader levels, ACM menus, and system 

messages. 

 

The top row of yellow buttons control global 
automation functions.  These buttons are mirrored 

by their corresponding buttons in the Global 

Functions window.  
 

The two rows of red buttons control automation 

modes and submodes. These buttons are mirrored 
by their corresponding buttons in the Channel 

Control window.  

 

The next row of green buttons enable automation 
functions and DAW Control, as well as a Clear 

Sub-Mode button. Some of these buttons are 

mirrored by their corresponding buttons in the 
Global Functions window.  

Summary of Contents for 7-22-10
























































































































































































































































































































































































Reviews:

No comments

Related manuals for 7-22-10

Yamaha MG20XU Owner'S Manual preview
MG20XU
Brand: Yamaha Pages: 40
Oster FPSTHM2578 User Manual preview
FPSTHM2578
Brand: Oster Pages: 9
Air Comm Systems ACS 775SL-SP Installation And Operation Manual preview
ACS 775SL-SP
Brand: Air Comm Systems Pages: 9
Randall MOR Operation Manual preview
MOR
Brand: Randall Pages: 2
Amptweaker BigRock Pro Manual preview
BigRock Pro
Brand: Amptweaker Pages: 4
Marantz 7T Service Manual preview
7T
Brand: Marantz Pages: 28
API 7800 User Manual preview
7800
Brand: API Pages: 10
Oldfield OD’78 User Manual preview
OD’78
Brand: Oldfield Pages: 4
Shift Line A+ Prism II Quick Start Manual preview
A+ Prism II
Brand: Shift Line Pages: 5
Promixx Original Vortex Mixer Manual preview
Original Vortex Mixer
Brand: Promixx Pages: 4
Gemini 15 User Manual preview
15
Brand: Gemini Pages: 28
JBL CSM 14 Operation Manual preview
CSM 14
Brand: JBL Pages: 28
Tascam TEAC PROFESSIONAL M-164 Owner'S Manual preview
TEAC PROFESSIONAL M-164
Brand: Tascam Pages: 40
Larius Mini Mix Operating And Maintenance Instructions Manual preview
Mini Mix
Brand: Larius Pages: 48
Sparky Group BM 1360CEPlus Original Instructions Manual preview
BM 1360CEPlus
Brand: Sparky Group Pages: 91
Wolfgang Puck BISTRO BMSD0010 User Manual preview
BISTRO BMSD0010
Brand: Wolfgang Puck Pages: 14
Hobart H-600 Instruction Manual preview
H-600
Brand: Hobart Pages: 28
Lacor 293.3630 Instructions For Use And Maintenance Manual preview
293.3630
Brand: Lacor Pages: 40

Brands by name

Popular brands

Load more brands