API Audio Accessories 7-22-10 Operator'S Manual Download Page 163

Page: 163 / 375

19.3.4

Timecode

The Timecode window displays the current SMPTE or MIDI Timecode location, framerate,

and source.

The Timecode display will scale to the window size when the window is resized.

TC: Timecode framerate display

•

29.97

•

29.97 Drop

•

30 Drop

Source: Source of the Timecode being displayed

•

LTC: Longitudinal Time Code (SMPTE)

•

MTC: MIDI Time Code

•

VITC: Vertical Interval Time Code (select “----“ as the Timecode Source for VITC)

Note: The Timecode Source is selected using the Console Settings menu in the ACM.

Refer to section 26.2.8 Timecode and Synchronization, 28.4 Timecode Setup, and
26.7.3.8 Console Settings for details regarding Timecode setup.

19.3.5

Project

The Project window is used for the creation and management of mix files, songs, and

snapshots.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands