API Audio Accessories 7-22-10 Operator'S Manual Download Page 312

Page: 312 / 375

Follow the prompts in the Wizard to complete the installation of the new software.

28.2.1.1

Install or Update the Vision PC Software

To install or update the Vision PC software, perform the following procedure:

Download the latest PC software .zip file from the software support website.

Open the “pcvision_05_XX.zip” file and double-click the “setup.exe” icon.

The API Vision Setup Wizard will start will open.

Follow the instructions and prompts provided by the Wizard to complete the

installation.

28.2.2

Updating ACM Firmware

To update the firmware in the Automation Control Module (ACM), select “Update ACM
Firmware…” from the Setup Menu.

Summary of Contents for 7-22-10
























































































































































































































































































































































































Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands

API Audio Accessories 7-22-10, Operator'S Manual

Search results

Summary of Contents for 7-22-10

Reviews:

Related manuals for 7-22-10

Brands by name

Popular brands