Ametek 10001i, User Manual

Page: 192 / 341

User Manual
178 i Series / iX Series
Table ZDC14:
Test No. Section Subject Test Limits Comment File Ref.
16.6.1 Normal Operating Conditions (dc)
16.6.1.1b Voltage (Average Value dc) 11.0V to 15.2V Apply for 30 mins each test EZDC14_VAVG
16.6.1 Emergency Operating Conditions (dc)
16.6.1.1b(3) Voltage (Average Value dc) 9.0V Apply for 30 mins each test EZDC14_VAVGEMER
16.6.1 Normal Operating Conditions (dc)
16.6.1.2
1
Ripple Voltage (dc) Vp-p = 0.3V to .8V, Freq = 10Hz to 200Hz Figure 18-2 EZDC14_VRIP
16.6.1.3b Momentary Power Interruptions (dc) Table 16-3 Equipment with Digital Circuits EZDC14_PINTB
16.6.1.3c Momentary Power Interruptions (dc) Other Equipment EZDC14_PINTC
16.6.1.4 Normal Transients (dc)
16.6.1.4b - Normal Voltage Surge (dc) 25V to 6V EZDC14_NVSUR
16.6.1.5 Engine Starting Under Voltage Operation (dc) 5V min Slew for 35 sec EZDC14_VENG
16.6.2 Abnormal Operating Conditions (dc)
16.6.2.1 Voltage Steady State (dc) 10.3V to 16.1V Apply for 5 mins each test EZDC14_VABN
16.6.2.3 Momentary Undervoltage (dc) 6V Apply for 7 seconds each test EZDC14_VUND
16.6.2.4 Abnormal Transients (ac)
16.6.2.4b - Abnormal Voltage Surge 40VDC Figure 16-4 - apply at 10 sec intervals EZDC14_AVSUR
1
For more comprehensive DC Ripple tests, refer to section 9.1.2.10.