![background image](http://html1.mh-extra.com/html/abbott/cell-dyn-3200/cell-dyn-3200_system-operators-manual_450985476.webp)
10-42
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Troubleshooting and Diagnostics
Tables for Instrument Conditions and Messages
Section 10
Printer (Graphics or Ticket) Unavailable/SB
– – – - Probable Cause – – – –
– – – - Corrective Action – – –
1. The print buffer (the memory area
where the information is stored
while awaiting printing) is full.
1. Press the
[STOP PRINTING]
key on
the
CUSTOMIZE PRINTED REPORT
screen for the appropriate printer.
2. The printer is turned OFF.
2. Turn the printer power switch ON.
3. The printer is not on-line.
3. Check that the printer “on-line”
indicator is illuminated. If
necessary, refer to the printer
manual for assistance.
4. The power cord is loose or
disconnected. The interface cable is
loose or disconnected.
4. Check the power cable connection
on the printer and power outlet.
Make sure the connections are
secure. Check the interface cable
connectors on the printer and
Analyzer. Make sure the
connections are secure. Press
[PRINT REPORT]
. If the message is
still displayed, turn the printer
power switch OFF and ON to reset
the printer.
5. Printer cable is connected to the
wrong port.
5. Ensure that the graphics printer
cable is attached to the graphics
printer port (LPT1) and the ticket
printer cable is attached to the ticket
printer port (LPT2).
Table 10.2 General Fault Conditions (Continued)