CELL-DYN
®
3200 System Operator’s Manual
10-7
9140181H—October 2001
Section 10
Troubleshooting and Diagnostics
Figure 10.6 WOC Count Rate Data
Each key displays kinetic data for the selected parameter from the last cycle run.
When each key is pressed, the count rate data is displayed (see Figure 10.6) and the
key label changes to
[CNT GRAPH]
for that parameter.
Count rate data from the last cycle is displayed in a tabular format. The total count,
time segments and rate per second are displayed for multiple data points from that
cycle. (See Figure 10.6.) When the
[CNT GRAPH]
key for a particular parameter is
pressed, the rate-per-second data is displayed as a graph. (See Figure 10.7.) The
kinetic data and graph are useful when troubleshooting problems related to these
parameters.
