manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 3

CELL-DYN

®

3200 System Operator’s Manual

iii

9140181K—July 2002

Abbott’s liability for all matters arising from the supply, installation, use, repair, 
and maintenance of the Instrument, whether arising under this Warranty or 
otherwise, shall be limited solely to the repair or (at Abbott’s sole discretion) 
replacement of the Instrument or of components thereof. In no event shall Abbott 
be liable for injuries sustained by third parties, incidental or consequential 
damages, or lost profits. Replaced parts shall become the property of Abbott 
Laboratories.

THE FOREGOING IS THE SOLE WARRANTY MADE BY ABBOTT 
LABORATORIES REGARDING THE INSTRUMENT, AND ABBOTT 
SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR 
IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.

The CELL-DYN 3200 Series Hematology Systems are manufactured by Abbott 
Diagnostics, Abbott Laboratories, at 5440 Patrick Henry Drive, Santa Clara, CA 
95054, U.S.A. Please direct all inquiries concerning information in this manual to 
the foregoing address.

NOTE:

Direct all inquiries regarding equipment problems to the Abbott 
Hematology Customer Support Center. (U.S. customers only.)

Regulatory and Safety Agency Approvals

UL1262

Approved

CSA 22.2 # 151

Approved

IEC 1010-1

Approved

In Vitro Diagnostic Directive

98/79/EC

Legal Manufacturer

Abbott Laboratories
Abbott Park, Il 60064 US

Authorized Representative

ABBOTT
Max-Planck-Ring 2
65205 Wiebaden
Delkenheim, Germany

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands