manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 540

11-10

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Quality Control

Quality Control Menu

Section 11

Figure 11.7 The Levey-Jennings Menu Screen Showing Next 10

Group

Each of the Group keys is used to select the graphs for a group of data that 
correspond to the groups selected in the Customize QC Display option. Subsequent 
groups may be selected by pressing the appropriate soft keys.

NOTE:

The soft key for the group currently shown on the screen is not 
displayed.

Print

The 

[PRINT]

 key is used to print the Levey-Jennings graphs. When the 

[PRINT]

 key 

is pressed, all of the graphs are automatically printed.

Return

The 

[RETURN]

 key is used to return to the 

VIEW QC LOG

screen.

Reject/Accept Specimen

The

 [REJECT SPECIMEN]

 key is used to exclude the results for the specimen 

indicated by the cursor position. When the key is pressed, the key label changes to 

[ACCEPT SPECIMEN]

, an “R” is displayed in the column immediately left of the 

results and the statistics are recomputed excluding those results. (Refer to 
Figure 11.8.) The data is still displayed and stored in the file but is excluded from 
the statistical calculation.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands