manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 91

CELL-DYN

®

3200 System Operator’s Manual

2-15

9140181K—July 2002

Section 2

Installation Procedures and Special Requirements

Sample Loader Inspection (SL Model)

The Sample Loader is attached directly to the Analyzer to form an integrated unit, 
as shown in Figure 2.8.

Four screws, two on either side, hold the Sample Loader to the Analyzer. A power 
cord provides power from the Analyzer to the loader, and an interface cable allows 
communication between the Analyzer and loader. The Analyzer and Sample 
Loader are also connected by two quick-disconnect tube lines, one for pressure and 
one for vacuum.

The tube spinning and sample aspiration mechanism on the Tower Module is 
identical on both the SL and CS models. The Tower Cover on the SL model differs 
from its counterpart on the CS model in two ways:

1. It is larger in order to extend over the center portion of the Sample Loader 

which contains the Bar Code Reader and Mixing Assembly.

2. It serves as a safety cover, halting operation of the Sample Loader if it is 

removed.

Figure 2.8 Analyzer With Sample Loader

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands