manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 69

CELL-DYN

®

3200 System Operator’s Manual

1-21

9140181H—October 2001

Section 1

Use or Function

The floppy disk drive is used to update the software program and to download data. 
The hard drive is used to store the User Interface Software and Patient Data Log. 
It has sufficient capacity to store the most recent 10,000 cycles, including numeric 
and graphics data.

Printed Circuit Boards

A set of 

Printed Circuit Boards

 constitutes the measurement and control 

electronics for detection, amplification, and processing of signals.

PC Keyboard Connector

The 

PC Keyboard Connector

 port is used to connect the standard computer 

keyboard.

LIS (Laboratory Information System) Connector

Two serial ports are provided. COM1 is used to connect the Laboratory 
Information System to the Data Module. COM2 is unused.

Analyzer BDM Diagnostics (Unused)

HSSL (High Speed Serial Link) Connectors

The High Speed Serial Link transfers data between the Analyzer and the Data 
Module. The 

HSSL Connector

 on the Data Module connects to the 

HSSL 

Connector

 on the back panel of the Analyzer.

Membrane Keypad Interface Connector

The 

Membrane Keypad Interface Connector

 allows data to be sent from the 

Membrane Keypad on the Display Monitor to the Data Module.

Display Station Interface Connector

The 

Display Station Interface Connector

 allows data to be sent to the monitor 

and data to be received from the Membrane Keypad (Soft Keys) on the Display 
Station.

Ticket Printer Connector

This port is used to connect the printer cable when the printer is used to print data 
in a ticket format.

Graphics Printer Connector

This port is used to connect the printer cable when the printer is used to print data 
in a graphics format.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands