CELL-DYN
®
3200 System Operator’s Manual
5-113
9140181H—October 2001
Section 5
Operating Instructions
Work List Set Up Menu Fields
1.
SPECIMEN NAME ENTRY SELECTED
This field is used to specify whether or not a specimen (patient) name will be
entered into the Work List. If this option is turned OFF, the cursor will skip
to the next ON field. However, the operator can use the arrow keys to place
the cursor in this field and enter data, if desired.
2.
PATIENT ID ENTRY SELECTED
This field is used to specify whether or not a patient ID will be entered into
the Work List. If this option is turned OFF, the cursor will skip to the next ON
field. However, the operator can use the arrow keys to place the cursor in this
field and enter data, if desired.
3.
PATIENT SEX ENTRY SELECTED
This field is used to specify whether or not the sex of the patient will be
entered into the Work List. If this option is turned OFF, the cursor will skip
to the next ON field. However, the operator can use the arrow keys to place
the cursor in this field and enter data, if desired.
4.
PATIENT DOB ENTRY SELECTED
This field is used to specify whether or not the patient’s date of birth will be
entered into the Work List. If this option is turned OFF, the cursor will skip
to the next ON field. However, the operator can use the arrow keys to place
the cursor in this field and enter data, if desired.
5.
COLLECTION DATE AND TIME ENTRY SELECTED
This field is used to specify whether or not the collection date and time of the
specimen will be entered into the Work List. If this option is turned OFF, the
cursor will skip to the next ON field. However, the operator can use the arrow
keys to place the cursor in this field and enter data, if desired.
6.
DR NAME ENTRY SELECTED
This field is used to specify whether or not the name of the patient’s doctor
will be entered into the Work List. If this option is turned OFF, the cursor will
skip to the next ON field. However, the operator can use the arrow keys to
place the cursor in this field and enter data, if desired.
7.
PATIENT LIMITS ENTRY SELECTED
If this option is turned OFF, the prior setting will be entered automatically for
each entry. The operator can, however, input a different setting for individual
entries by using the arrow keys to place the cursor in this field and type in a
new setting. The new setting applies only to the entry(ies) that was changed.
If this option is turned ON, the operator may then select another default
setting by typing in a number from 1 to 6. This new setting will be
automatically assigned to each new entry by the operator. The operator also
has the ability to enter a different setting for individual entries. When the
cursor moves to the <Patient Limits Set> field of a particular entry, the
operator may override the default setting and type in a new setting for that
entry.
