manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 16

xvi

CELL-DYN

®

3200 System Operator’s Manual

9140181K—July 2002

Text Conventions Used in This Manual

The following list summarizes the text conventions that are used in this manual:

Soft Keys (Screen Label Keys)

Screen labels are menu keys displayed at the bottom of the display screen. Directly 
below the display screen is a row of eight unlabeled pressure-sensitive keys which 
correspond to the menu labels. Pressing one of these keys (on the membrane 
keypad) initiates the action specified by the corresponding menu label.

This manual indicates that one of these “soft keys” is to be pressed by showing the 
label in all caps, bold, sans serif font, and enclosed in brackets. For example, when 
the manual calls for the operator to press the key under the RUN label and then the 
key under the SPECIMEN TYPE label, the text will read “Press 

[RUN]

 followed by 

[SPECIMEN TYPE]

.”

Keyboard/Keypad Keys

In some cases, the operator must press a key on the PC keyboard or on the pressure-
sensitive keypad on the front of the instrument. Such keys include the Enter key, 
the ESC key, the pound (#) key, and other special function keys. Special function 
keys, such as the arrow keys, are in regular type. The arrow symbol may be 
substituted for the word. For example, the text will read “Press the arrow keys” or 
“Press the 

↑

 key” or “Press the 

↑

 arrow key.”

The Print Screen key on the keyboard can be used to print the screen as it is 
displayed on the monitor. This allows the operator an option to print the screen 
when the 

[PRINT]

 soft key is not available.

Information

Presentation

Examples

Menu name

Sans serif font, all capital letters

MAIN MENU

DATA LOG

 menu

Soft keys (screen label keys)

Sans serif font, all capital letters, 

enclosed in brackets

[RUN]

Keyboard/keypad keys

Regular font, initial capital letters only 

when appropriate

arrow keys

↑

 arrow key

Enter key

ESC key

Page Up key

the pound (#) key

the asterisk (*) key

Status

Regular font, all capital letters

READY

STANDBY

INITIALIZED

Data entry field

Regular font, enclosed in angle brackets

<

Operator ID

>

 field

Screen message or other screen 

display

Courier

Waste Full

ON and OFF

All caps, regular font

ON

OFF

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands