5-142
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Operating Instructions
Using The Data Log
Section 5
To Customize the Data Log Printout
1. From the main
DATA LOG
screen, press
[CUSTOMIZE DATA LOG]
followed by
[CUSTOMIZE PRINTOUT]
.
2. Use the Arrow keys on the keyboard to move the cursor to the desired
parameter in the list displayed under the printout group.
3. Press
[SELECT PARAMETER].
The selected parameter is highlighted and the
cursor moves to the first position in the group.
NOTE:
The key label changes to
[PLACE PARAMETER]
and a
[CANCEL
SELECTION]
key is displayed.
4. If necessary, use the Arrow keys on the keyboard to move the cursor to the
desired location and press
[PLACE PARAMETER]
.
NOTE:
When the
[PLACE PARAMETER]
key is pressed, the selected
parameter is displayed in the position indicated by the cursor and
the cursor then advances to the next parameter in the list displayed
under the printout group.
5. Repeat steps 2–4 until all selections have been made.
6. If desired, press the Print Screen key on the keyboard to obtain a printout of
the configuration.
7. Press
[RETURN]
twice to return to the
DATA LOG
screen.
Standard Selection
The
[STANDARD SELECTION]
key is used to automatically arrange the parameters
in a predetermined print group.
