CELL-DYN
®
3200 System Operator’s Manual
5-135
9140181H—October 2001
Section 5
Operating Instructions
Customize Printout
The
[CUSTOMIZE PRINTOUT]
key is used to customize the printout format of the
Data Log. (See Figure 5.51.) The following soft key labels are displayed when the
[CUSTOMIZE PRINTOUT]
key is pressed:
SELECT PARAMETER/
PLACE PARAMETER
(The key alternates between the selections.)
STANDARD SELECTION
RETURN
The
CUSTOMIZE PRINTOUT FOR DATA LOG
screen shows the order (from left to
right) in which the indicated parameters will be printed.
Select Parameter
The
[SELECT PARAMETER]
key is used to select a parameter designated by the
cursor. When the key is pressed, the selected parameter is highlighted, the label
changes to
[PLACE PARAMETER]
and a
[CANCEL SELECTION]
key is displayed.
Place Parameter
The
[PLACE PARAMETER]
key is used to display the parameter in the location
indicated by the position of the cursor.
Cancel Selection
The
[CANCEL SELECTION]
key is used to cancel the selection and display the
[SELECT PARAMETER]
key.
Standard Selection
The
[STANDARD SELECTION]
key is used to configure the printout in the pre-
determined print group shown in Figure 5.49. When the key is pressed, the print
group is changed to the Standard Selection.
Return
The
[RETURN]
key is used to return to the main
DATA LOG
screen.
