5-134
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Operating Instructions
Using The Data Log
Section 5
Standard Groups
Pre-determined groups of parameters, called Standard Groups, may be selected by
pressing the
[STANDARD GROUPS]
key. Refer to Figure 5.49 which shows the
CUSTOMIZE DISPLAY FOR DATA LOG
screen with the standard groups displayed.
The following soft key labels are displayed when the
[STANDARD GROUPS]
key is
pressed:
WBC GROUP
RBC GROUP
PLT GROUP
DIFF GROUP
CUSTOM PLACEMENT*
CUSTOMIZE PRINTOUT
RETURN
* The
[CUSTOM PLACEMENT]
key is used to return to the
CUSTOMIZE DISPLAY FOR
DATA LOG
screen for operator-selected placement.
Figure 5.49 shows the WBC Group placed in
GROUP 1
, the RBC Group placed in
GROUP 2
, the PLT Group placed in
GROUP 3
and the Diff Group placed in
GROUP 4
.
When each soft key is pressed, the designated parameter group is placed in the
position indicated by the cursor.
Figure 5.51 Customize Printout for Data Log Screen
