manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 200

5-48

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Set Up Instructions

Section 5

Figure 5.22 Customize Printed Report Screen for the Graphics Printer

Graphics Printer

When the 

[GRAPHICS PRINTER]

 key is pressed, the

CUSTOMIZE PRINTED REPORT 

screen for the Graphics Printer is displayed. (See Figure 5.22.) A description of the 
options available on the 

CUSTOMIZE PRINTED REPORT 

screen

 

is given below:

1.

AUTO-PRINT RESULTS FOR ALERTED SPECIMENS

When this option is enabled, a report is automatically printed for any sample 
with flagged results.

2.

AUTO-PRINT RESULTS FOR NON-ALERTED SPECIMENS

When this option is enabled, a report is automatically printed for any sample 
without flagged results.

3.

PRINT GRAPHS FOR ALERTED SPECIMENS ONLY

When this option is enabled, scatterplots and histograms are printed only for 
samples with flagged results.

4.

PRINT PCT, PDW RESULTS

When this option is enabled, the results for PCT and PDW are printed on the 
report.

NOTE:

Clinical significance has not been established for these parameters. 
Therefore, they are not reportable.

5.

PRINT X-B RBC PROGRAM STATUS

When this option is enabled, the status of the X-B RBC program is printed on 
the report. The X-B status (for example, X-B RBC: 13/OUT2) is printed 
below the Status Box.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands