CELL-DYN
®
3200 System Operator’s Manual
10-37
9140181H—October 2001
Section 10
Troubleshooting and Diagnostics
Loader Warning 145: unload area full
/BL
– – – – – – – – – – – – – – – – – Explanation/Action– – – – – – – – – – – – – – – –
The unload area contains 5 racks. NOTE: The Sample Loader halts.
No corrective action is necessary. When you wish to run additional samples in
the Sample Loader, remove the racks from the unload area and press the
[START
LOADER]
key.
Loader Warning 146: unload area nearly full
/BL
– – – – – – – – – – – – – – – – – Explanation/Action– – – – – – – – – – – – – – – –
The unload area contains 4 racks.
No corrective action is necessary. If a rack is being processed and there are no
other faults, the Sample Loader will continue to operate.
Loader Status 158: load zone empty
/BL
– – – – – – – – – – – – – – – – – Explanation/Action– – – – – – – – – – – – – – – –
The load zone empty sensor is not sensing the presence of a rack in the load zone.
NOTE: The Sample Loader halts.
When you wish to run samples in the Sample Loader, load tubes in racks and
press the
[START LOADER]
key.
Table 10.1 Status
Conditions (Continued)
