manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 559

CELL-DYN

®

3200 System Operator’s Manual

12-1

9140181H—October 2001

Section 12

Printers

Section 12 

Printers

Overview

The CELL-DYN 3200 system is configured with a color Graphics Printer (known 
in this manual as the Graphics Printer). The printer is set up to print reports, 
including complete graphic information, on 8.5" X 11" paper. The printer may be 
set up to print graphic information in color or black only.

If ticket printing is desired for the CELL-DYN 3200, a second printer (known as 
the Ticket Printer) can also be connected to the system at the same time as the 
Graphics Printer. Results are automatically printed at the completion of each run 
cycle or are printed on command by the operator. The Ticket Printer can be used to 
print reports with graphic information in black only, but the connection to the 
Analyzer must be changed.

IMPORTANT: 

The CELL-DYN 3200 System has been configured for and 

tested on the following printers: Canon

®

 BJC

™

-620, and BJC-4300/4400 

and Epson

®

 800/850/888 color ink jet printers for graphics output, and 

OKIDATA

®

 MICROLINE

®

 320 dot matrix printer for ticket printing. 

Abbott recommends using only these printers. If other printers are substi-
tuted, problems may occur with your printouts.

Refer to 

Section 2: 

Installation Procedures and Special Requirements

; 

Subsection: 

Printer Installation

 for instructions on installing both printers.

Complete directions for customizing the printout type and format are given in 

Section 2: 

Installation Procedures and Special Requirements

; Subsection: 

Customizing Printouts

.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands