manualshive.com logo in svg

Abbott CELL-DYN 3200, System Operator'S Manual

Share
Download
Abbott CELL-DYN 3200 System Operator'S Manual Download Page 564

12-6

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Printers

Routine Operation

Section 12

5. Raise the separator to its upright position.
6. Place a ticket on the paper separator and adjust the guides so that they barely 

touch the edges of the ticket.

7. Pull the bail lever forward. The ticket will automatically feed into place. 

Release the paper bail lever.

8. Be sure the printer is deselected (Sel indicator is not illuminated) and set the 

Top of Form by pressing and holding the TOF/Quiet key and pressing the 
Form Feed key to move the ticket up or pressing the Line Feed key to move 
the ticket down. (The ticket moves in very fine increments so it can be 
precisely positioned.)

NOTE:

The ticket will only move down to a certain point to prevent 
potential ticket jams. Do not move the top of the page below the 
paper bail.

9. Position the ticket so that the lower red line on the paper shield (located 

between the print head and the paper) is positioned where the first line of 
printing should occur.

NOTE:

When the Top of Form is set, the position is retained in the printer 
memory until it is reset.

10. Press the 

Sel

 key to select the printer. The printer is now ready to print.

Summary of Contents for CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands