manualshive.com logo in svg

Mitsubishi Electric MELSERVO-J2-Super Series, Руководство по переходу

Серия Mitsubishi Electric MELSERVO-J2-Super - передовой продукт для автоматизации процессов. Скачайте бесплатно руководство пользователя "Transition Handbook" для эффективного использования данной серии на сайте manualshive.com. Обеспечьте успешную настройку и эксплуатацию оборудования благодаря подробным инструкциям.

Поделиться
Скачать
background image

[Appendix 2] Introduction to Renewal Tool 

 

Appendix 2-65 

 

Note   1. Purchase from Mitsubishi Electric. 
 

  2. The actual reduction ratio is different when replacing a servo motor. Note that it is necessary to adjust the electronic gear after 

checking the actual reduction ratio of the servo motor. Refer to Part 8 for details. 

 

  3. Note that because the flange dimensions and shaft end dimensions are not compatible it is necessary to change the servo 

motor shaft connection portion, including the mounting portion and the coupling/pulley when replacing the servo motor. Refer to 
Part 8 for details. 

 

  4. Before replacing the servo motor, the moment of inertia is different from the servo motor before replacement. Take note of the 

load to motor inertia ratio. Review of the operation pattern is necessary depending on the existing device. Refer to Part 8 for 
details. 

 

  5. If the gain of the existing servo amplifier is extremely high, there may be slight differences in characteristics upon primary 

replacement. Make sure to set the gain again. 

 

  6. Note that it is because the total length of the servo motor becomes shorter, the servo motor connector may interfere with the 

device side.  

 

  7. Laying a new electromagnetic brake cable is required when performing a secondary replacement or simultaneous replacement 

of a servo motor with brake. Use a servo motor electromagnetic brake cable (SC-BKC1CBL_M-L or SC-BKC1CBL_M-H) made 
by Mitsubishi Electric System & Service Co., Ltd. 

 

  8. If the servo motor is replaced, it is necessary to change the crimped terminal of the existing power supply cable. Refer to Part 8 

for details. 

 

  9. There is no cooling fan in the replacement servo motor when the servo motor is replaced. Because the existing wiring becomes 

unnecessary, insulate as needed. 

 

10. Simultaneous replacement is recommended because replacing the servo amplifier again is necessary at secondary 

replacement. 

 

11. The renewal kit cannot be used for secondary or simultaneous replacement due to large differences in servo amplifier shape 

resulting from changes in servo amplifier capacity. 

 

12. The software version for primary replacement of servo amplifiers are different depending on the servo motor. Consult local 

sales office when making an order. 

 

13. Contact local sales office regarding replacement of existing models that have not been listed. 

 

14. The replacement servo amplifier, SSCNET conversion unit, and renewal kit are the same for primary, secondary, and 

simultaneous replacement. 

 

15. When replacing a servo motor, the torque characteristics are different compared with the servo motor before replacement. 

Refer to Part 8 for details. 

 

16. This is not compatible with primary replacement. Perform a simultaneous replacement of a servo amplifier and a servo motor. 

 

17. When performing a replacement of a servo motor, a new encoder cable is required to be laid. Contact Mitsubishi Electric 

System & Service Co., Ltd. if a new cable required. 

 18. 

A conversion cable on the servo amplifier side is not included in the package. Purchase the following cable set separately 
according to a servo amplifier to be used and its capacity. 
MR-J4-700A4 or less: SC-J2SJ4CSET-01 
MR-J4-11KA4 or more: SC-J2SJ4CSET-02 
MR-J4-700B4 or less: SC-J2SBJ4CSET-01 
MR-J4-11KB4 or more: SC-J2SBJ4CSET-02 

 

19. When combining, a renewal kit is not required. Purchase only a conversion cable on the servo amplifier side, if necessary. 

 

20. This servo amplifier is required to be used in combination with the converter unit MR-CR55K. 

 

21. This servo amplifier is required to be used in combination with the converter unit MR-CR55K4. 

 

Содержание MELSERVO-J2-Super Series























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSERVO-J2-Super Series

Fender III Quick Start Manual preview
III
Бренд: Fender Страницы: 20
Harman Kardon CA260 Owner'S Manual preview
CA260
Бренд: Harman Kardon Страницы: 9
K-array KA40 User Manual preview
KA40
Бренд: K-array Страницы: 8
K&M Analog Designs LTD Owner'S Manual preview
LTD
Бренд: K&M Analog Designs Страницы: 10
K&K Sound ULTRAPURE Product Manual preview
ULTRAPURE
Бренд: K&K Sound Страницы: 4
Clockaudio CAP002 Manual preview
CAP002
Бренд: Clockaudio Страницы: 3
Triode Lab Au Pre Quick User Manual preview
Au Pre
Бренд: Triode Lab Страницы: 9
Kompernass KH 5010 Operating Instructions Manual preview
KH 5010
Бренд: Kompernass Страницы: 49
Total Mobile Audio T2-320.4 Owner'S Manual preview
T2-320.4
Бренд: Total Mobile Audio Страницы: 11
Ramsey Electronics UAM4 Manual preview
UAM4
Бренд: Ramsey Electronics Страницы: 36
Vicon V200VA-B Installation & Operation Manual preview
V200VA-B
Бренд: Vicon Страницы: 13
Anthem MCA 20 Operating Manual preview
MCA 20
Бренд: Anthem Страницы: 12
TACT Millennium MKII Owner'S Manual preview
Millennium MKII
Бренд: TACT Страницы: 9
Marshall Amplification G50RCD User Manual preview
G50RCD
Бренд: Marshall Amplification Страницы: 8
Denon PMA-2000AE Service Manual preview
PMA-2000AE
Бренд: Denon Страницы: 34
Cyrus SmartPower User Instructions preview
SmartPower
Бренд: Cyrus Страницы: 20
Audio Control Architect 100 Installer'S Manual preview
Architect 100
Бренд: Audio Control Страницы: 26
Audio System R 1250.1 D Owner'S Manual preview
R 1250.1 D
Бренд: Audio System Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды