Mitsubishi Electric MELSERVO-J2-Super Series, Руководство по переходу

Страница: 146 / 662

Part 4: Review on Replacement of MR-J2S-_CP_/CL_ with MR-J4-_A_-RJ
4 - 37
MR-J2S-_CP_ or MR-J2S-_CL_ MR-J4-_A_-RJ
No. Name and function
Initial value
No. Name and function
Initial
value
CP CL
63
Low-pass filter/adaptive vibration suppression control
Select the low-pass filter/adaptive vibration suppression
control.
0000h 0000h PB23 Low-pass filter selection
Set "0000 (automatic setting)".
0000h
PB18 Low-pass filter setting
One of the following statuses is applied,
depending on how [Pr. PB23] is set.
PB23 PB18
_ _ 0 _
(Initial value)
Automatic setting
_ _ 1 _ Setting value enabled
_ _ 2 _ Setting value disabled
Nothing needs to be set due to automatic
setting.
3141
PB01 Adaptive tuning mode (adaptive filter II)
Refer to MR-J2S-_CP_ [Pr. 61].
0000h
0 0 0
Low-pass filter
0: Automatic setting
1: Manual setting
2: Disabled
0
Low-pass filter selection
0: Available (Automatic adjustment)
1: Disabled
When available is selected, the filter in the zone
expressed by the following formula is automatically
set.
For 1 kW or less
VG2 setting value × 10
[Hz] 2 π × (1 + GD2 setting value ×
0.1)
For 2 kW or more
VG2 setting value × 5
[Hz] 2 π × (1 + GD2 setting value ×
0.1)
Adaptive vibration suppression control selection
Selecting "Enabled" or "Retained" for the adaptive
vibration suppression control will disable the machine
resonance suppression filter 1 (Parameter No.61).
0: Disabled
1: Available
Usually, machine resonance frequency is detected,
and a filter corresponding to the resonance is
generated to control machine vibration.
2: Maintenance
Stops detection of machine resonance while
keeping the characteristics of the filter generated
until that moment.
Adaptive vibration suppression control level selection
Used to set the machine resonance detection
sensitivity.
0: Normal
1: High sensitive