Chapter 4 - Electrical Connections
_______________________________________________________________________________________________________________
MNL000298.doc
Revision 2
09/16/2016
SourceSystem TE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
4
-
7
A 1-1/8” (28.6 mm) diameter hole for ¾” conduit is supplied for connecting the 120/240 VAC power
supply to the system. The conduit hole is located on the top of the controller enclosure. Two
additional holes are supplied for customer I/O. See Figure 4.4 below.
Figure 4.4: Rear View of GASGUARD® TE11 Controller