Patio Heater
Designed for domestic and
commercial use, to heat indoor and
outdoor spaces using energy efficient
Far-Infrared Carbon Fibre heating
technology.
Code 90232
Patio Heater
Operating & Safety Guide 471
Operating & Safety Guide 471
471/01
471/01
©HSS Hire Service Group Ltd 2010 No. 471/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
…any comments?
If you have any suggestions to enable us to improve the
information within this guide please e-mail your comments or
write to the Safety Guide Manager at the address below
e-mail: [email protected]
... have you been trained
The law requires that personnel using this type of equipment
must be competent and qualified to do so. Training is available at
HSS Training Solutions
0845 766 7799
Before cleaning , turn the heater off, unplug from the
power supply and
wait for the unit to cool down.
To clean the heater use a soft cloth to wipe off any dust.
If the heater or aluminium reflector is very dirty, use a damp
cloth and wipe dry.
A dirty reflector reduces heater output.
Do not use any cleaning detergents, sprays or other
chemicals, as they will damage the unit.
When not in use, cover the equipment and store
somewhere clean, dry and safe from thieves.
EQUIPMENT CARE
FINISHING OFF
Switch the unit off. Disconnect from power supply. Wait
until it cools down.
Give the unit a final clean up ready for return, to your local
HSS Hire.
MOVING
Ensure
heater is turned off
and unplugged
before
moving.
To manoeuvre the unit, tilt
the heater backwards to
approx. 30
o
and using rear
transport rollers move it to
desired location.
Always use the hand grip
located on the rear of the
heater.
PIR ECONOMY FUNCTION
The PIR (Passive Infrared) economy
feature enables the Patio Heater to
automatically shut down when not
in use. The PIR sensor constantly
monitors peoples movements up
to a distance of 4 metres and if
after 4 minutes it does not detect
movement it will switch itself off. It
will automatically switch on again
when someone passes by.
LIGHT HEAD OPERATION
The light head can be tilted in 4
positions.
Do not force or over
rotate these 4 positions as the
light-neck may get damaged.
30
hand grip
110 angle
4m distance
SAFETY TIP OVER SWITCH
Appliance switches off if it tips-over.
Return the unit to the upright
position and switch on to continue
using.
WARNING
Do not lift or pull heater using the light head as this
will damage the light neck mechanism
Never push the equipment beyond its design limits. If it
will not do what you want with reasonable ease and speed,
assume you have the wrong equipment for the job. Contact
your local HSS Hire for advice.
Keep the equipment clean - you will find this less of a
chore if you clean it regularly, rather than wait until the end
of the hire period.
