Chapter I - Introduction
_______________________________________________________________________________________________________________
MNL000296.doc
Revision 2
09/16/2016
SourceSystem TE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
I
-
3
This manual covers the tasks required to install, operate and maintain a GASGUARD
Gas Equipment
System. GASGUARD
Gas Equipment Systems including Source System Gas Cabinets and Racks.
Because of unique installation variables from site to site, it is not intended as a step-by-step installation
procedure, but relies on the knowledge of qualified personnel to perform the work properly. This
manual should be read thoroughly by the supervising installation engineer before installation is begun.
GASGUARD
Equipment Systems have been designed and built in accordance with the Uniform Fire
Code (UFC) and the National Fire Protection Association (NFPA). They must be installed and
operated in accordance with the UFC, NFPA and all other applicable industrial, federal, state and local
codes.
GASGUARD
is a registered trademark. The GASGUARD
name is officially registered and legally
restricted to be used only by Versum Materials, Inc. The information and data contained herein are
proprietary to Versum Materials, Inc. and are not to be copied, reproduced, duplicated or disclosed to
others, in whole or in part, without prior written consent of Versum Materials, Inc.
This restriction shall not apply to any safety information contained in the manual. The safety
information is intended for your use and we encourage you to copy it so that anyone using this
equipment knows how to use it safely.