Chapter 8 - Operating Procedures
_______________________________________________________________________________________________________________
MNL000302.doc
Revision 2
01/04/2019
SourceSystemTE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
8
-
33
window will allow the operator to exit the window or enter a new analog range minimum and/or
analog range maximum for one or more analog points.
8.6.9 Alarm Conditions
The Alarm Conditions window will display the alarm input type, alarm number, alarm label, and alarm
condition for each system alarm. This window will allow the operator to change the alarm condition
for digital alarms to closed, open, or not used and the alarm condition for analog alarms to high, low,
or not used. The window will allow the operator to change one or more alarms or to exit the window
without changes. The Alarm Delays show the current alarm time delay (in seconds) for each alarm in
the system. The window will allow the operator to enter a new time delay value for one or more
alarms or exit the window. A delay entry of ‘0’ equates to no delay. The range of values is from 0 to
99 seconds.
The Alarm Types have the possible alarm types of Fault, Shutdown, Sequence Controlled, and Non-
Latching. The alarm type is not editable.
8.6.10 Helium Leak Check
The Helium Leak Check Menu window will display the leak check options and will indicate the
currently selected leak check options. The options will be Outboard He Leak Check, and No Leak
Check. The operator will be allowed to exit the window or change the leak check option.
8.6.11 Password List
The Password List selection from the Configuration Menu manages user levels and passwords. There
are two security access levels with permissions as given in Table 8.2.
8.6.12 System Setup
The System Setup window will allow the user to choose Language Option, Edit Date or Edit Time.
8.6.13 Edit Date/Edit Time
The Edit Date/Time window will display the current time and date for the system. The window will
allow the operator to exit the window or enter a new time and/or date for the system.