Chapter 4 - Electrical Connections
_______________________________________________________________________________________________________________
MNL000298.doc
Revision 2
09/16/2016
SourceSystem TE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
4
-
9
4.4 External I/O Communication
Connections between the GASGUARD® TE11 controller and external I/O devices are made at the
terminal blocks located inside the controller, on the back wall, left side. See Figure 4.6 for details on
the location of the connections.
Figure 4.6: I/O Terminal Blocks
The tables on the following pages list recommended external I/O communications and detail digital
output and digital input connections.
Specific I/O field wiring connections for this system are found on the drawings in the document
envelope, supplied with each system.
Additional I/O circuit boards may have been purchased as an option with this specific system. If so
equipped, termination for the additional points will be shown in the drawings located in the document
envelope.