Chapter 8 - Operating Procedures
_______________________________________________________________________________________________________________
MNL000302.doc
Revision 2
01/04/2019
SourceSystemTE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
8
-
32
8.6.5 Digital Inputs
This option displays a list of the digital inputs and their current state. The state may be used to
determine if the digital device is operating properly.
To scroll through the digital input values, use the <PREV key or the NEXT>.
8.6.6 Digital Outputs
This option displays a list of the digital outputs and their current values. Outputs may be forced "on"
(energized) or "off" (de-energized) to determine if the output is operating properly.
This file operates in a similar manner to manual operation as described in Section 8.5. It is the
customer's responsibility to adhere to all operational warnings in Section 8.5 when performing the
Digital Out Test.
To scroll through the digital input values, use the <PREV or the NEXT>. Touch the State block to
toggle the output state.
Extreme care must be taken when
forcing a digital output either on or off
as there is no confirmation in Digital
Out Test, as a reminder, like that which
is used in manual operation for critical
valve operation.
8.6.7 Analog Inputs
This option displays a list of the analog inputs and their current values. The current value may be used
to determine if the analog device is providing accurate output (controller input).
To Scroll through the digital input values, use the <PREV key or the NEXT>.
8.6.8 Analog Setup
The Analog Setup allows you to enable and change the scaling of analogs. This window will display
all analogs used in the system. The operator will be allowed to choose an analog or exit the window.
Then the operator chooses an analog, a window will be displayed to allow the operator to enter a new
maximum or minimum analog scaling value. The Analog Scaling window will display the analog
number, analog label, minimum analog value, and maximum analog value for each analog point. This