Chapter 2 - Dimensions and Mounting
_______________________________________________________________________________________________________________
MNL000295.doc
Revision 2
09/16/2016
SourceSystem TE11
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
2
-
27
2.2.1 Enclosure Anchoring
For Enclosure anchoring see the following Mounting Hole Location Figures for proper floor location
of four (4) 7/16” (11.1 mm) diameter holes in Enclosure floor.
Do not use inner manufacturing bolt
hole set in cabinet base
. Using the inner manufacturing bolt hole set may interfere with gas cylinder
and/or cylinder weight scale placement within the Enclosure.
2.2.1.1
- 2 Cylinder Enclosure or 2 Cylinder Euro (XH-Extra High) Enclosure
2.2.1.2
- 3 Cylinder Enclosure or 3 Cylinder Euro (XH-Extra High) Enclosure
2.2.1.3
- 1x1 Cylinder Enclosure or 1x1 Cylinder Euro (XH-Extra High) Enclosure
2.2.1.4
- 1x2 Cylinder Enclosure or 1x2 Cylinder Euro (XH-Extra High) Enclosure